Table of Contents
Advertisement
10.
Find the 13 "nagra" key files on your PC in the right
pane of your DCC.
11.
Highlight one of these thirteen files and click the
leftward pointing arrow between the DreamBox and the PC
pane to send the file to the DreamBox.
12.
Repeat with the other files.
13.
Make sure the capitalization is correct; it does
matter.
Procedure for images with Newcamd:
1. Use DCC as described above and transfer the keylist,
rsakeylist, mappings, nagraepr10, nagraram10,
nagrarom10, nagraepr3, nagraram3, nagrarom3,
and nagrarom3ext to the /var/tuxbox/scce folder not
/var/scce. You can transfer them all if you like but the
"7"s aren't used right now. This keylist is different from
Evocamd's keylist.txt. Newcamd does not use /var/keys
at all.
Advertisement
Table of Contents
