Table of Contents
Advertisement
We will provide you with an example to demonstrate how this
should be done. This example will be for 4 LNBs connected to a
4x1 DiSEqC switch tuning satellites at 82, 91, 110, and 119
degrees.
We will assume that you have your dish aligned correctly and
that you have LNBs aimed at these 4 satellites connected by
RG6 cables to a 4x1 switch.
1. Connect 82 to Input 1.
2. Connect 91 to Input 2.
3. Connect 110 to Input 3.
4. Connect 119 to Input 4.
5. Connect an RG6 cable to the "Receiver" output post
on the switch and connect to the "In" post on the
DreamBox
Procedure:
1. Using the remote control press "Menu" and go to Settings
then Service Searching then Satellite Configuration to this
screen.
Advertisement
Table of Contents
