Table of Contents
Advertisement
10. In the top line box, labeled "IP of Dreambox" enter the IP
address of your DreamBox.
11. In the next line box down, enter the IP address of the
machine where NFSDream is installed.
12. Once both fields have been populated, press the "Mount"
button.
Configuring your DreamBox
1. Press "MENU" on the remote and go to Settings then down
to "Expert Setup" and then to "Communication Setup".
Press the
Blue
2. Enter the following information:
a. The IP of the PC housing the NFS drive in the "IP:" box.
b. Make sure "NFS" is showing in the drop down box.
c. "dreambox" in the "Dir:" box.
d. "/hdd" in the "LocalDir:" box
e. Leave "rw" in the "Options:" box.
f. Don't change the value in the "Extra" box.
g. Make sure "Automount" is checked.
button on the remote to select "mounts".
Advertisement
Table of Contents
