Table of Contents
Advertisement
your Router is 192.168.0.1 use 192.168.0.24 for your
DreamBox. If the router is 220.120.34.6 then use
220.120.34.24 for your DreamBox.
c. If you are not sure of your network settings you can
find them from your PC. Go to Start and click "Run"
and enter "cmd" in the blank without the quotes. At
the prompt, enter ipconfig.
IP Address is the address of the PC you are on.
Subnet mask you will use later.
Default Gateway you will also use later. (This
should be your router IP also.)
2. Press the "Menu" button to bring up the toolbar at the
bottom of the screen. Look for the setup icon and press
OK. Go to "Expert Setup" then "Communication Setup".
3. Here you will enter the addresses for your network so you
can communicate with the DreamBox from other PCs and
so you can get to the internet from the DreamBox if
needed. (You can also check DHCP and let the DreamBox
obtain a valid IP address from your Router.)
Advertisement
Table of Contents
