Mounting; Dimension Drawing - Siemens SINUMERIK 828D PPU Series Manual

Connectable components
7.1 MCP 483C PN
LED for status display
When the system is booting, all three LEDs are lit.
Name Designation
H1 PowerOK
H2 PNSync
H3 PNFault
7.1.2

Mounting

7.1.2.1

Dimension drawing

The 483C PN machine control panel is ideally combined with a horizontal PPU. The
recommended combination sequence is shown in the figure:
MCP 483C PN dimension drawing
Figure 7-4
102
Color Description
Green Lit: Power supply OK
Green Lit: System software running, STOP state
Flashes 0.5 Hz: System software running, RUN state
Red Not lit: Module is operating without errors; data exchange with all configured IO Devices
is running.
Lit: Serious bus fault; only output when one of the following errors is detected for the
ports:
No physical connection to a subnet/switch

Incorrect transmission rate

Full duplex transmission is not activated

Front and side view of MCP 483C PN
Manual, 11/2010, 6FC5397-2DP10-1BA0
PPU