Assembling - Siemens SINUMERIK 828D PPU Series Manual

7.5.2

Assembling

Figure 7-37
The I/O module can be fastened to the wall of the control cabinet using a mounting plate.
The module must be installed according to EN 60204.
Mounting versions:
● Portrait mounting at the lateral strap of the mounting plate (2x M5 or M6 screws).
● Flat mounting at the rear wall of the mounting plate (4x M5 or M6 screws).
PPU
Manual, 11/2010, 6FC5397-2DP10-1BA0
PP 72/48D 2/2A PN dimension drawing
WARNING
A protective conductor must be connected using the grounding screw.
Connectable components
7.5 PP 72/48D 2/2A PN
173