Configuring The Arbitration Software (Red Hat/Red Flag/Neokylin/Centos) - Huawei OceanStor 2000 V3 Series Features Manual

OceanStor V3 Series
HyperMetro Feature Guide for File
5.
Step 5 (Optional) Configure a whitelist.
After you replace a certificate, you must configure a whitelist.
The arbitration software allows a storage system to connect to the quorum server only after
you configure a whitelist and add the SN of storage system to the arbitration software. If you
replace another certificate, you do not need to configure a whitelist anymore.
1.
2.
3.
----End
4.4.2 Configuring the Arbitration Software (Red Hat/Red Flag/
NeoKylin/CentOS)
This section describes how to configure the arbitration software in Red Hat, Red Flag,
NeoKylin, or CentOS.
Prerequisites
The arbitration software must be configured in user mode.
Procedure
Step 1 Prepare for the configuration.
Issue 05 (2018-01-30)
admin:/>import tls_cert ca=qs_cacert.crt cert=qs_cert.crt
Command executed successfully.
After replacing certificates on the quorum server, replace the certificates on the local and
remote storage arrays. For details, see Managing Certificates section.
NOTICE
In the CLI of the storage system, run the show system general command to query the
storage system SN.
admin:/>show system general
System Name : XXXXXX
Health Status : Normal
Running Status : Normal
Total Capacity : X.XXXTB
SN : XXXXXXXXXXXXXXXXXXXX
Location :
Product Model : XXXXX
Product Version : VX00R00XC00
High Water Level(%) : XX
Low Water Level(%) : XX
WWN : XXXXXXXXXXXXXXX
Time : XXXX-XX-XX/15:11:15 UTC+08:00
In the CLI of the arbitration software, run the add white_list sn=? command to add the
storage system SN to the arbitration software for management.
admin:/>add white_list sn=XXXXXXXXXXXXXXXXXXXX
Command executed successfully.
(Optional) Run the change white_list enable_switch=no command to close the whitelist
if you do not need to configure it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration
70