Huawei OceanStor 2000 V3 Series Features Manual page 74

OceanStor V3 Series
HyperMetro Feature Guide for File
Issue 05 (2018-01-30)
Figure 4-2 Configuration requirements of virtual network adapters
Table 4-2 Configuration requirements of virtual network adapters
Name Configuration
Requirement
Networ vmnic0 connects to
k controller A of the local
adapter and remote storage
2 systems in the HyperMetro
pair.
Networ vmnic1 connects to
k controller B of the local
adapter and remote storage
3 systems in the HyperMetro
pair.
– When deploying the arbitration software using physical machines, the two ports of
the quorum server are not bonded and you are advised to configure service IP
addresses at two different network segments for arbitration ports. In this example,
arbitration software is deployed on physical machines, and two ports of the quorum
server are not bonded.
Table 4-3 Examples for configuring IP addresses of arbitration services
Arbitration
Port
Arbitration
port 1
Arbitration
port 2
Run the vi command to open the configuration file of the network adapter used by the
quorum server for arbitration. The following uses network adapters eth1 and eth2 for
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 4-3 lists configuration examples.
Service IP Address
192.168.6.31
192.168.7.31
Example
Switch name: vSwitch 1
n
Physical adapters name: vmnic0
n
Physical adapters IP addresses and
n
mask: 192.168.6.31/255.255.255.0
Switch name: vSwitch 2
n
Physical adapters name: vmnic1
n
Physical adapters IP addresses and
n
mask: 192.168.7.31/255.255.255.0
Mask
255.255.255.0
255.255.255.0
4 Configuration
66