Huawei OceanStor 2000 V3 Series Features Manual page 127

OceanStor V3 Series
HyperMetro Feature Guide for File
l
l
l
l
Context
l
l
l
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Step 3 Click Create.
The Create Quorum Server dialog box is displayed.
Step 4 Set Name and Description of the quorum server and click Next.
l The name contains 1 to 31 characters.
l The name can contain only letters, digits, underscores (_), periods (.), and hyphens (-).
Step 5 Set the properties of the quorum server and click Next.
Table 4-19
Issue 05 (2018-01-30)
The system time of the storage arrays and quorum server is correct. The validity period
of the default arbitration certificate is 10 years (start from September 2015). Ensure the
system time of the quorum server is correct so that the default arbitration certificate is
valid.
The service IP addresses of the quorum server are correctly configured and correct
firewall ports (30002) are enabled.
The white list of the quorum server is configured correctly. (You do not need to check
this item if the default security policy is used.)
Service IP addresses have been configured for the service ports that are used to connect
storage arrays and the quorum server. In addition, the service IP address of the storage
arrays and quorum server can ping through with each other. For details about how to
configure service IP addresses for storage arrays, see OceanStor V3 Series V300R006
Basic Storage Service Guide for Block. After configuring the service IP addresses, query
and record the IP addresses' ports. Then perform the operation in step 7 to select a port.
Perform the following operation to query the ports: On DeviceManager management
page, choose Provisioning >
To ensure the reliability between quorum servers and storage devices, you are advised to
add at least one link between each controller of storage devices and a quorum server.
This operation is performed on both the local and the peer remote storage systems.
The quorum site supports two quorum servers for V300R006C10 and later versions. In
following operations, the first added quorum server becomes the active quorum server
and the other becomes the standby quorum server.
Data Protection >
NOTE
lists related configuration parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Port > Ethernet Ports.
HyperMetro > Quorum Server.
4 Configuration
119