Installation - Huawei OceanStor 2000 V3 Series Features Manual

OceanStor V3 Series
HyperMetro Feature Guide for File
About This Chapter
This chapter describes how to install the HyperMetro feature and devices related to the
feature, connect cables, and power on devices, helping you avoid unnecessary rework during
and after installation.
3.1 Installation Process
Before the installing a storage array, view the installation process. The installation process
guides you through a smooth and complete installation.
3.2 Preparations for Installation
Preparations before installing devices include preparing tools and meters, checking the
installation environment, and unpacking and checking goods. Sufficient preparation ensures a
safe and proper installation.
3.3 Device Installation
Install devices as instructed in the following description to avoid unnecessary rework at your
site.
3.4 Cable Connection
HyperMetro cable connection involves the network between hosts and storage arrays,
HyperMetro replication network, same-city data center network, and quorum network.
3.5 Power-on
After installing all devices, power on them and check their operating status. Ensure that all
devices and their hardware are properly installed. Otherwise, do not power on them.
3.6 Storage Array Initialization
After powering on a storage array, you must initialize it.
3.7 Arbitration Software Installation
This section describes how to install the arbitration software. Quorum server software needs
to be installed only when a quorum server is used for HyperMetro.
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Installation

3 Installation
36