Huawei OceanStor 2000 V3 Series Features Manual page 87

OceanStor V3 Series
HyperMetro Feature Guide for File
Step 2 Go to the command-line interface (CLI) of the arbitration software.
In any directory of the quorum server's operating system, run the qsadmin command to open
the arbitration software. The arbitration software page is displayed.
XXX@Linux:~# qsadmin
start main!
Waiting for connecting to server...
admin:/>
Step 3 Add the service IP address and port ID of the quorum server to the arbitration software.
In the CLI of the arbitration software, run the add server_ip command to add the service IP
address and port ID of the quorum server to the arbitration software for management.
admin:/>add server_ip ip=192.168.6.31 port=30002
Command executed succesfully.
admin:/>add server_ip ip=192.168.7.31 port=30002
Command executed succesfully.
After configuration is complete, run the show server_ip command. If the command output
shows the IP address and port ID that are added, the configuration succeeds.
admin:/>show server_ip
Index
-----
1
2
Index
-----
Step 4 (Optional) Replace the original certificates of the quorum server with new ones.
1.
Issue 05 (2018-01-30)
30002/tcp (v6)
NOTE
After the arbitration software is started, run the help command to check help information and understand
the commands that are required during the configuration process.
NOTE
l Service IP addresses of the quorum server are used for interworking with the storage array when an
arbitration server is added to the storage array. If two ports of the quorum server are not bonded, IP
addresses of the two ports must be from different network segments. If two ports of the quorum
server are bonded, IP addresses of the two ports must be the same.
l The ID of the arbitration software's listening port must be the same as that of the port enabled on the
firewall.
Server IP
------------
192.168.6.31
192.168.7.31
Local IP
------------
NOTE
To further improve storage system security, you are advised to replace the default security certificate and
private key of the storage systems and those of the quorum server with your own security certificate and
private key.
Export the certificate request file of the quorum server.
In the CLI of the arbitration software, run the export tls_cert command to export the
device information. The qs_certreq.csr file is generated in the /opt/quorum_server/
export_import directory of the quorum server.
admin:/>export tls_cert
Command executed successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
.
.
.
ALLOW Anywhere (v6)
Server Port
------------------
30002
30002
Local Port Remote IP
--------- --------
4 Configuration
Remote Port State
--------- -----
79