Reversing The Refrigerator Door - Insignia NS-RTM10BK0 User Manual

Reversing the refrigerator door

CAUTION: If you lay your refrigerator on its back or side for any length of time, wait for six hours after you stand it up again before you
plug it in. Otherwise, you may damage internal components.
You will need the following tools to reverse the refrigerator door:
1 Make sure that your refrigerator is unplugged.
2 Pry the top hinge cover up and off, remove the three screws that secure the upper hinge to the door, then remove the
hinge.
3 Remove the freezer compartment door from the cabinet.
4 Remove the two screws that secure the center hinge, then remove the center hinge.
5 Remove the refrigerator compartment door.
10
8 mm nut wrench
www.insigniaproducts.com
10.5 Cu. Ft. Top Mount Refrigerator
Phillips screwdriver
Hinge cover
Screws
Upper hinge
Freezer compartment
Center hinge
Door bushing
Screws