Reversing The Refrigerator Door - Insignia NS-RTM10BK2 User Manual

Reversing the refrigerator door

CAUTION: If you lay your refrigerator on its back or side for any length of time, wait for six hours after you stand it up again before you
plug it in. Otherwise, you may damage internal components.
You will need the following tool to reverse the refrigerator door:
1 Make sure that your refrigerator is unplugged.
2 Remove the screw and the screw hole cover on the top left side of your refrigerator, then remove the screw and hinge
cover on the top right side of your refrigerator.
3 Remove the screws that secure the upper hinge to the door, then remove the upper hinge.
Screw hole
cover
4 Remove the freezer compartment door from the refrigerator by lifting it off the hinge pin.
5 Remove the hinge pin from the upper hinge, then flip the hinge over and install the hinge pin on the other side of the
upper hinge.
6 Remove the two screws that secure the center hinge to the refrigerator, then remove the center hinge.
7 Remove the refrigerator compartment door.
10
Phillips screwdriver
Upper hinge
Hinge pin
www.insigniaproducts.com
Hinge cover
Upper hinge
Freezer compartment
Center hinge
Screws