Advertisement
OPERATING ISSUE
Not displaying accurate weights
If scale is indicating insufficient sample
Scale shuts off or will not turn on
Error 2
If the problem persists, or if the troubleshooting section does not resolve or describe your problem, contact Uline Customer
Service at 1-800-295-5510.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 6 OF 6
TROUBLESHOOTING
RECOMMENDATIONS
Make sure all shipping material has been removed (foam protective screw, etc.).
Make sure there is nothing on the platform when the scale is turned on.
Make sure sample and piece weight meet the scales minimum requirements.
Remove battery and plug the scale in. If the scale works, you will need to replace the battery.
Make sure shipping screw is removed from bottom of scale. Perform three point calibration.
1-800-295-5510
uline.com
0515 IH-1121
Advertisement
