U-Line H-1653 Manual

U-Line H-1653 Manual

Easy-count scales
Table of Contents

Advertisement

Available languages

Available languages

H-1649, H-1650, H-1651
π
H-1653, H-1654
EASY-COUNT SCALES
AVOID PLACING THE SCALE IN LOCATIONS
THAT MAY HURT ACCURACY:
• Temperature extremes – Do not place in direct
sunlight or near air heat/cooling vents.
• Mounting surface must be firm and level – Do
not place on uneven or wobbly surfaces or near
vibrating machinery.
• Unstable power sources – Keep away from big
electricity-using machines, like welding equipment
or large motors.
• Keep scale dry – Do not place in high humidity,
damp or wet locations.
• Keep away from air movers, like fans or open doors
and windows.
• Keep scale clean and dry.
• Do not stack items on the scale when not in use.
CAUTION! Scale is not waterproof. Avoid
direct contact with water, high humidity and
condensation. Do not spray or immerse scale
in water. Data may become unstable or scale
may malfunction. Turn power off and allow
scale to dry before reuse.
LCD DISPLAY
Low Battery
Stable
HI
OK
LO
Check Weighing
PAGE 1 OF 27
1-800-295-5510
uline.com
GENERAL INFORMATION
Percentage Weighing
Parts Counting
Weighing Unit
Pour le français, consulter les pages 19-27.
DISPLAY CHARACTERS
CHARACTER
DISPLAY
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
Para Español, vea páginas 10-18.
CHARACTER
DISPLAY
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0417 IH-1649

Advertisement

Table of Contents
loading

Summary of Contents for U-Line H-1653

  • Page 1 Para Español, vea páginas 10-18. Pour le français, consulter les pages 19-27. H-1649, H-1650, H-1651 π 1-800-295-5510 H-1653, H-1654 uline.com EASY-COUNT SCALES GENERAL INFORMATION AVOID PLACING THE SCALE IN LOCATIONS DISPLAY CHARACTERS THAT MAY HURT ACCURACY: CHARACTER DISPLAY CHARACTER DISPLAY •...
  • Page 2: Specifications

    SPECIFICATIONS MODEL # H-1653/H-1654 H-1649 H-1650 H-1651 MAXIMUM CAPACITY 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. MINIMUM CAPACITY ACCURACY (DIV) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 3: Installation

    INSTALLATION Stainless steel platform is packed separately. 5. Power switch is located on the bottom right side of the scale. Remove set screw on bottom of scale. Level Feet Power Switch 2. Level the scale. Adjust the four feet and reference bubble on top of scale to level.
  • Page 4 OPERATION CONTINUED PARTS COUNTING CONTINUED Both Limits Set: • The display shows when the weight is within Zero 5. Press the ZERO/ENTER key when the displayed the limits. number matches the number of items used in the sample. As more weight is added, the display shows Low Limit Set, High Limit Set to Zero: the number of pieces ( •...
  • Page 5 OPERATION CONTINUED MANUAL ACCUMULATION AUTOMATIC ACCUMULATION When the scale is set for manual accumulation: When scale is set for automatic accumulation: 1. Add a weight to the scale. The beeper sounds when Press the ACC key to store the displayed weight the weight is stable to indicate the weight is added.
  • Page 6: Battery Operation

    FUNCTIONS CONTINUED CHANGE UNIT OF WEIGHT DISPLAYED CHANGE THE AUTOMATIC POWER OFF DELAY Select kilograms, grams, ounces or pounds. Display shows power auto off time, select one of the following: • Turns off auto off function. Press TARE/^ to select. Tare •...
  • Page 7 FULL CAPACITY (Maximum) 9. Scale will enter a self-test mode. Remove weight H-1654 2 lb. 6 lb. before self-test mode is complete. After completing H-1653 2 lb. 6 lb. the self-test, the scale will enter the weighing mode. H-1649 4 lb.
  • Page 8: Troubleshooting

    TROUBLESHOOTING OPERATING ISSUE CAUSES RECOMMENDATIONS Display is blank, scale Main power is turned off. Check that power is going to the shuts off or will not turn on. scale. Verify that switch is turned on. Power supply not plugged in. Verify the voltage going to the scale Power supply faulty.
  • Page 9: Error Codes

    TROUBLESHOOTING CONTINUED OPERATING ISSUE CAUSES RECOMMENDATIONS Not linear. Overload stops hitting too soon. Look for obstruction under pan and verify pan installation. Load cell or mechanics damaged. Set linearity. A/D damaged. Off center loading error. Adjust mechanics. Look for obstruction under pan and verify pan installation.
  • Page 10: Información General

    H-1649, H-1650, H-1651 π 01-800-295-5510 H-1653, H-1654 uline.mx BÁSCULA CUENTA FÁCIL INFORMACIÓN GENERAL EVITE COLOCAR LA BÁSCULA EN SITIOS QUE CARACTERES EN PANTALLA PUDIERAN AFECTAR LA PRECISIÓN: CARÁCTER PANTALLA CARÁCTER PANTALLA • Temperaturas extremas – No coloque en la luz del sol directa o cerca de salidas de aire acondicionado o calefacción.
  • Page 11: Especificaciones

    ESPECIFICACIONES MODELO # H-1653/H-1654 H-1649 H-1650 H-1651 CAPACIDAD MÁXIMA 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. CAPACIDAD MÍNIMA PRECISIÓN (DIV) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 12: Instalación

    INSTALACIÓN La plataforma de acero inoxidable está empacada por 5. El interruptor para encender está localizado en la separado. parte inferior derecha de la báscula. Retire tornillo de fijación de la parte inferior de báscula. Patas para Nivelación Interruptor 2. Nivele la báscula. Ajuste las cuatro patas y la burbuja de referencia en la parte superior de la báscula para nivelar.
  • Page 13 CONTINUACIÓN DE FUNCIONAMIENTO CONTINUACIÓN DE CONTEO DE PARTES Ambos Límites configurados: • La pantalla muestra cuando el peso está dentro Zero 5. Presione la tecla ZERO/ENTER cuando coincida de los límites. el número en pantalla con el número de artículos Límite Bajo configurado, Límite Alto configurado a cero: utilizados como muestra.
  • Page 14 CONTINUACIÓN DE FUNCIONAMIENTO ACUMULACIÓN MANUAL ACUMULACIÓN AUTOMÁTICA Cuando la báscula es configurada para acumulación Cuando la báscula es configurada para Acumulación manual: Automática: Presione la tecla ACC para almacenar el peso Agregue peso a báscula. Emitirá sonido cuando el mostrado en la memoria cuando el peso se estabilice. peso se estabilice para indicar que peso es agregado.
  • Page 15 CONTINUACIÓN DE FUNCIONES CAMBIE LA UNIDAD DE PESO MOSTRADA CAMBIE EL TIEMPO DE DEMORA DEL APAGADO AUTOMÁTICO Seleccione kilogramos, gramos, onzas o libras. Pantalla muestra tiempo para apagado automático, Presione TARE/^ para seleccionar. Tare seleccione uno de los siguientes: 2. Presione ZERO/ENTER para establecer su Zero •...
  • Page 16 Después de completar el modo de auto H-1654 2 lb. 6 lb. prueba, la báscula entrará en modo de pesaje. H-1653 2 lb. 6 lb. H-1649 4 lb. 12 lb.
  • Page 17: Solución De Problemas

    SOLUCIÓN DE PROBLEMAS PROBLEMA DE FUNCIONAMIENTO CAUSAS RECOMENDACIONES Pantalla en blanco, la báscula se Interruptor principal está apagado. Revise que la energía vaya a la báscula. Verifique apaga o no enciende. que el interruptor esté encendido. Fuente de poder no está conectada. Verifique que el voltaje que va a la báscula Fuente de poder defectuosa.
  • Page 18: Código De Error

    CONTINUACIÓN DE SOLUCIÓN DE PROBLEMAS PROBLEMA DE FUNCIONAMIENTO CAUSAS RECOMENDACIONES Sin linealidad. Sobrecarga deja de golpear muy Busque la obstrucción debajo de pronto. plataforma y verifique instalación de plataforma. Celdas de carga o mecanismo dañado. Configure linealidad. A/D dañado. Error por carga fuera del centro. Ajuste mecánico.
  • Page 19: Renseignements Généraux

    H-1649, H-1650, H-1651 π 1-800-295-5510 H-1653, H-1654 uline.ca BALANCE EASY-COUNT RENSEIGNEMENTS GÉNÉRAUX ÉVITEZ DE PLACER LA BALANCE DANS DES CARACTÈRES D'AFFICHAGE ENDROITS QUI PEUVENT AVOIR UN IMPACT INDÉSIRABLE SUR LA PRÉCISION : CARACTÈRE AFFICHAGE CARACTÈRE AFFICHAGE • Températures extrêmes : ne placez pas la balance au soleil ou près des bouches de chauffage/...
  • Page 20: Spécifications

    SPÉCIFICATIONS N° DE MODÈLE H-1653/H-1654 H-1649 H-1650 H-1651 CAPACITÉ MAXIMALE 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. CAPACITÉ MINIMALE PRÉCISION (DIV) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 21 INSTALLATION La plateforme en acier inoxydable est emballée 5. L'interrupteur d'alimentation se trouve du côté inférieur séparément. droit de la balance. Retirez la vis de réglage au bas de la balance. Pieds de nivellement Interrupteur d'alimentation 2. Nivelez la balance. Ajuster les quatre pieds et bulle de référence située en haut de la balance pour procéder au nivellement au niveau de référence.
  • Page 22 FONCTIONNEMENT (SUITE) COMPTAGE D'ÉLÉMENTS (SUITE) 6. Après avoir appuyé sur la touche ZERO/ENTER , la Zero balance revient au mode de pesage avec Zero 5. Appuyer sur la touche ZERO/ENTER lorsque le la fonction Pesage de vérification activée. nombre affiché correspond au nombre d'éléments utilisé...
  • Page 23 FONCTIONNEMENT (SUITE) ACCUMULATION MANUELLE ACCUMULATION AUTOMATIQUE Lorsque la balance est réglée pour l'accumulation manuelle : Lorsque la balance est réglée pour l'accumulation automatique : Appuyez sur la touche ACC pour enregistrer le Ajoutez un poids sur la balance. L'avertisseur sonore poids affiché dans la mémoire une fois le poids stable. retentit lorsque le poids est stable afin d'indiquer que ACC 1 2.
  • Page 24: Fonctionnement De La Batterie

    FONCTIONS (SUITE) MODIFIER LES UNITÉS DE POIDS AFFICHÉES MODIFIER LE DÉLAI D'ARRÊT AUTOMATIQUE Sélectionnez kilogrammes, grammes, onces ou livres. L'affichage indique la fonction de délai d'arrêt automatique. Sélectionnez l'une des options suivantes : Appuyez sur TARE/^ pour sélectionner. Tare • Fonction d'arrêt automatique désactivée. 2.
  • Page 25 Nº de modèle 1/3 DU POIDS (Minimum) PLEINE CAPACITÉ (Maximum) terminé, la balance passera en mode de pesage. H-1654 2 lb 6 lb H-1653 2 lb 6 lb ÉTALONNAGE À PLUSIEURS POINTS (LINÉAIRE) H-1649 4 lb 12 lb L'étalonnage à plusieurs points utilise trois points d'étalonnage :...
  • Page 26: Dépannage

    DÉPANNAGE PROBLÈME DE FONCTIONNEMENT CAUSES RECOMMANDATIONS L'affichage est vide, la balance L'alimentation électrique principale est coupée. Vérifiez que la balance est alimentée en s'éteint ou ne s'allume pas électricité. Vérifiez que l'interrupteur est L'alimentation électrique n'est pas branchée. en position de marche. L'alimentation électrique est défectueuse.
  • Page 27: Codes D'erreur

    DÉPANNAGE (SUITE) PROBLÈME DE FONCTIONNEMENT CAUSES RECOMMANDATIONS Fonctionnement non linéaire. Les butées de surchargent entre en contact trop tôt. Recherchez la présence d'une obstruction sous le plateau et vérifiez Le système mécanique ou la cellule de charge est son installation. endommagé(e).

This manual is also suitable for:

H-1649H-1654H-1650H-1651

Table of Contents