Table of Contents
Advertisement
Security Menu
Use this menu to enable BIOS security options.
•
Administrator Password—This setting specifies a password that must be entered to
access the BIOS Setup Utility. If only the Administrator's password is set, then this only
limits access to the BIOS setup program and is only asked for when entering the BIOS setup
program. By default, no password is specified.
•
User Password—This setting specifies a password that must be entered to access the BIOS
Setup Utility or to boot the system. If only the User's password is set, then this is a power
on password and must be entered to boot or enter the BIOS setup program. In the BIOS
setup program, the User will have Administrator rights. By default, no password is
specified.
Save & Exit Menu
The Save & Exit setup menu includes all available options for exiting, saving, and loading the
BIOS default configuration. As an alternative to this screen, press <F9> to load optimal BIOS
default settings and <F10> to save changes and exit setup.
The Save & Exit setup menu includes the following settings:
•
Save Changes and Reset—Any changes made to BIOS settings are stored in NVRAM.
The setup program then exits and reboots the controller. The <F10> key can also be used
to select this option.
•
Discard Changes and Reset—Any changes made to BIOS settings during this session of
the BIOS setup program are discarded. The setup program then exits and reboots the
controller. The <Esc> key can also be used to select this option.
•
Save Changes—Changes made to BIOS settings during this session are committed to
NVRAM. The setup program remains active, allowing further changes.
•
Discard Changes—Any changes made to BIOS settings during this session of the BIOS
setup program are discarded. The BIOS setup continues to be active.
•
Restore Defaults—This option restores all BIOS settings to the factory default. This
option is useful if the controller exhibits unpredictable behavior due to an incorrect or
inappropriate BIOS setting. Notice that any nondefault settings such as boot order,
passwords, and so on, are also restored to their factory defaults. The <F9> key can also be
used to select this option.
•
Save As User Defaults—This option saves a copy of the current BIOS settings as the User
Defaults. This option is useful for preserving custom BIOS setup configurations.
•
Restore User Defaults—This option restores all BIOS settings to the user defaults. This
option is useful for restoring previously preserved custom BIOS setup configurations.
•
Boot Override—This option lists all possible bootable devices and allows the user to
override the Boot Option Priorities list for the current boot. If no changes have been saved
to the BIOS setup options, the system will continue booting to the selected device without
first rebooting. If BIOS setup options have been changed and saved, a reboot will be
required and the boot override selection will not be valid.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NI PXIe-8880 User Manual
© National Instruments | 2-13
Advertisement
Table of Contents
