Table of Contents
Advertisement
As an alternative method, complete the following steps:
1.
Power off the chassis.
2.
Remove the controller from the chassis.
3.
Press the Clear CMOS button (SW1) as shown in Figure 5-1.
Time and date cannot be reset by this switch.
Note
4.
Reinstall the controller in the chassis.
Figure 5-1. Clearing the CMOS Contents
1
1
Push-Button Switch SW1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NI PXIe-8880 User Manual
© National Instruments | 5-3
Advertisement
Table of Contents
