Table of Contents
Advertisement
Chapter 15
15 1
Use OpenVPN to Access Your Home Network
OpenVPN Server is used to create an OpenVPN connection for remote devices to
access your home network.
To use the VPN feature, you need to enable OpenVPN Server on your router, and install
and run VPN client software on remote devices. Please follow the steps below to set up
an OpenVPN connection.
*Image may differ from your actual product.
Home Network
Step1 Set up OpenVPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
Note:
•
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router's WAN port and synchronize your System Time with internet.
•
The first time you configure the OpenVPN Server, you may need to generate a certificate before you enable the VPN
Server.
3. Select the
Service Type
4. Enter a VPN
Service Port
should be between 1024 and 65535.
Router (VPN Server)
VPN Server
> OpenVPN, and tick the
(communication protocol) for OpenVPN Server: UDP, TCP.
to which a VPN device connects, and the port number
INTERNET
Remote Devices
Enable
box of OpenVPN.
VPN Server&Client
82
Advertisement
Table of Contents
