Roland TrueVIS SG2-640 Regular Maintenance Manual page 16

2.
Perform normal cleaning.
Procedure
1.
Press [▼] to display the screen shown below.
CLEANING
NORMAL CL.
2.
Press [ENTER] to confirm your entry.
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the proce-
dure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 sec-
onds")
CLEANING...
>>
When finished, the screen shown below appears again.
CLEANING
NORMAL CL.
3.
Press [▲] to display the screen shown below.
CLEANING
TEST PRINT
4.
Press [ENTER].
Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
5.
Check to make sure the dot drop-out or dot displacement has been corrected.
If the problem persists, try performing normal cleaning again. If the printer has been used for a long period,
dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case,
clean using a different method.
RELATED LINKS
・ P. 16 "When Normal Cleaning Is Not Effective"
01:45
Daily Print Head Check
2. Regular Maintenance
15