Roland TrueVIS SG2-640 Regular Maintenance Manual page 23

Manual Cleaning
5.
Moisten the cleaning stick with the cleaning liquid.
IMPORTANT
Be sure to use one of the included cleaning sticks.
6.
Clean the locations shown in the following figure.
Be especially careful to clean away any fibrous dust (lint).
7.
When you have finished cleaning, move the print-head carriage to above the platen.
Move the print-head carriage by hand.
CAUTION
8.
Attach the cut rail.
22
2. Regular Maintenance
When moving the print-head carriage by hand, be sure to hold the specified posi-
tion.
Moving it by holding positions other than that specified may deform and damage the cover.
: Position to hold with your hand