Roland TrueVIS SG2-640 Regular Maintenance Manual page 22

2.
Clean the print heads.
Procedure
1.
Open the front cover.
2.
Open the left cover.
3.
Remove the cut rail.
4.
Move the print-head carriage to the position where the cut rail was present.
Move the print-head carriage by hand.
CAUTION
: Position to hold with your hand
When moving the print-head carriage by hand, be sure to hold the specified posi-
tion.
Moving it by holding positions other than that specified may deform and damage the cover.
Manual Cleaning
2. Regular Maintenance
21