2. Verify whether the firmware is at proper level.
3. Rerun the test.
4. If the problem remains, contact your IBM technical-support representative.
Related links
–
Lenovo Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
DSA checkpoint panel test results
The following messages can result when you run the checkpoint panel test.
Test results for the DSA checkpoint panel test
The following messages can result when you run the DSA checkpoint panel test.
• 180-000-000 : Check-point Panel Test Passed
Check-point Panel Test Passed.
Recoverable
No
Severity
Event
Serviceable
No
Automatically notify support
No
Related links
–
Lenovo Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
• 180-801-000 : Check-point Panel Test Aborted
Check-point Panel Test Aborted. BMC is unable to verify that the operator information panel cable is
connected.
Recoverable
No
Severity
Warning
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. Inspect and reseat operator information panel cable at both ends.
2. Verify that the Baseboard Management Controller (BMC) is working.
1094
Lenovo System x3650 M5 Installation and Service Guide