Juniper QFX5120 Series Hardware Manual page 113

[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
11. Configure the IP address of a backup router, which is used only while the routing protocol is not running.
[edit]
root@# set system backup-router address
12. Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
13. (Optional) Configure the static routes to remote subnets with access to the management port. Access
to the management port is limited to the local subnet.
[edit]
root@# set routing-options static route remote-subnet next-hop destination-IP retain no-readvertise
14. Configure the telnet service at the [edit system services] hierarchy level.
[edit]
root@# set system services telnet
15. (Optional) Display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
116