Configuring Pim Common Information; Pim Common Information Configuration Task List - H3C S5500-EI Series Operation Manual

Operation Manual – Multicast
H3C S5500-EI Series Ethernet Switches
Note:
The commands introduced in this section are to be configured on all routers in the PIM
domain.
Caution:
Make sure that the same SSM group range is configured on all routers in the entire
domain. Otherwise, multicast information cannot be delivered through the SSM
model.
When a member of a multicast group in the SSM group range sends an IGMPv1 or
IGMPv2 report message, the device does not trigger a (*, G) join.

7.5 Configuring PIM Common Information

Note:
For the configuration tasks described in this section:
Configurations performed in PIM view are effective to all interfaces, while
configurations performed in interface view are effective to the current interface only.
If the same function or parameter is configured in both PIM view and interface view,
the configuration performed in interface view is given priority, regardless of the
configuration sequence.

7.5.1 PIM Common Information Configuration Task List

Complete these tasks to configure PIM common information:
Configuring a PIM Filter
Configuring PIM Hello Options
Configuring PIM Common Timers
Configuring Join/Prune Message Limits
Task
7-32
Chapter 7 PIM Configuration
Remarks
Optional
Optional
Optional
Optional