H3C S5500-EI Series Operation Manual page 164

Operation Manual – Multicast
H3C S5500-EI Series Ethernet Switches
and the BSR. Make sure that each C-RP has a unicast route to the BSR, the BSR
has a unicast route to each C-RP, and all the routers in the entire network have a
unicast route to the RP.
2) Check the RP and BSR information. PIM-SM needs the support of the RP and
BSR. Use the display pim bsr-info command to check whether the BSR
information is available on each router, and then use the display pim rp-info
command to check whether the RP information is correct.
3) View PIM neighboring relationships. Use the display pim neighbor command to
check whether the normal PIM neighboring relationships have been established
among the routers
7-55
Chapter 7 PIM Configuration