Presenter (Tup482); Cutter - Star Micronics TUP400 Series Technical Manual

1.

Presenter (TUP482)

[2]
[1]
[3]
2.

Cutter

[2]
[1]
[3]
[1]
[2]
[1]
[2]
(1) Disconnect the power cord from the AC outlet.
(2) Remove:
Screws 4 pcs. [1]
Presenter Holder L and R [2]
Presenter [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the
Presenter.
(2) Remove:
The presenter in Step 1.
Screws 5 pcs. [1]
Cutter Holder L and R [2]
Cutter [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the Cutter.
– 30 –