Specifications And Operation - Star Micronics TUP400 Series Technical Manual

This manual was created as a reference for maintenance of the Thermal Printer TUP400 Series for
personnel who are responsible for periodic inspections or troubleshooting of that equipment. This manual
was written for maintenance personnel, and was not intended to be used by the general operator.
This manual is organized into the following chapters.
Chapter 1 Specifications and Operation
Chapter 2 Theory of Operation
Chapter 3 Parts Replacement and Related Adjustments
Chapter 4 Maintenance and Lubrication
Chapter 5 Parts Lists
Model Name
TUP 4 5
• First edition : Aug.1997
• Second edition : Jun. 1998 Add interface board Ver. 2
INTRODUCTION
2 V2 D — 24 NL
No Transparent Laser
Voltage
24 : 24 VDC
Interface
D: RS232C
C: Parallel
K: RS422A
Board type
None:Ver.1
V2:Ver.2
Mechanism type
2: 40 columns
Printer type
5: Guilotine Type Full Cutter
8: Guillotine Type Full Cutter + Presenter
TUP400-series thermal printer
1
2
3
4
5