Changing The Interface Board - Star Micronics TUP400 Series Technical Manual

7.

Changing the Interface Board

You can change the printer's interface by replacing the interface board.
1. Turn the power supply OFF.
2. Remove the 2 Interface Board Screws.
3. Remove the Interface Board.
4. Insert the new Interface Board by pushing it along the guides.
Push until the connector is completely inserted.
5. Attach the 2 screws to attach the Interface Board to the printer.
(Note)
The printer will automatically recognize the new Interface Board when it has been changed.
Fig. 1-7 Changing the Interface Board
– 14 –