Printer Mechanism; Main Logic Board - Star Micronics TUP400 Series Technical Manual

3.

Printer Mechanism

[1]
[2]
[3]
4.

Main Logic Board

[1]
[2]
[3]
(1) Remove the power supply connector.
(2) Remove:
(1) Remove the power supply connector.
(2) Remove:
When removing the wiring band, check which one is
the lead wire.
[1]
– 31 –
Screws 4 pcs. [1]
Connector [2]
Cut the wire band in four places.
Printer Mechanism [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the printer
mechanims.
Four screws [1]
Wiring band
Connectors
Screws 4 pcs. [2]
Main Logic Board [3]