Table of Contents
Advertisement
1.
General Specifications
Printing method
Resolution
Printable width
Printing speeds
Printable characters
Character matrixes
Bar Codes
Paper
Recommended brands
Width
Thickness
Roll diameters
Interface
MCBF
Head longevity
Cutter longevity
Power supply
Power consumption
Operating environment
Storage environment
Approximately 3.1kg
Line thermal direct
8 dots/mm (H)
50 mm in Line Mode; 80 mm in Page Mode
2 Inches/sec and 1 Inch/sec
Page mode: ANK, International, Slash zero
Line mode: ANK, International, Special, Block graphics, IBM special,
IBM block graphics, Chinese characters, Slash zero
NOTE: ANK is comprised of ASCII characters and Japanese katakana characters.
Page mode
Small
Standard
Wide
OCR-B
Chinese chara.
Line mode
IBM block graphic 12 24 or 12 32
Chinese chara.
All others
JAN, EAN, UPC, Code39, ITF, Code93, Code128, NW-7
TF50KS-E, TF62KS-E (Nippon Paper Industries)
KP50-HEAEX (New Oji Paper Co., Ltd.)
0
82.5 mm(3.25 inches)
-1
General thermal paper 60 to 85 m
External 203 mm max. (8 Inch), Internal 32 mm (1.26 Inch)
RS232C, RS422A, or Parallel
5,000,000 Lines
100 Km or 1.0 x 10
(Missing dots is Max. 5%. However, there will be no missing dots up to 50Km.
This is the point where the thermal body resistor value varies more than 15% of the
initial value when continuously printing up to 12.5% of the printing rate.)
300,000 cuts (One piece max. paper thickness: 85 m.)
DC 24 V 7%
Max. 120 W
Temperature 5 C to 40 C
Humidity 25% to 80% (No condensation)
Temperature -20 C to 60 C
Humidity 10% to 90% (No condensation)
TUP452
Fig. 1-1 External Dimensions
8 dots/mm (V)
8 16
16 24
24 32
16 24
24 24
24 24 (12 24)
12 24
8
pulses(excludes damaged caused by dirt or foreign objects.)
– 6 –
Approximately 3.3kg
TUP482
Advertisement
Chapters
Table of Contents
