Furuno MCU-002 Manual page 9

(3) Note on Menu – Second Layer (MCU-002 and MCU-004 with TZT9/14/BB Only)
2nd Layer
The first layer of the Menu can also be scrolled with the [-/▲] and [+/▼] keys,
but the second layer cannot. We recommend that the arrow icons on the top and
bottom of the layer be pressed with the joystick to scroll the second layer.
1st Layer
[UP] arrow
[DOWN] arrow
(4) Note on Virtual Keyboard (MCU-002, MCU-004, and MCU-005)
To enter characters and numbers with a virtual keyboard, use the joystick or the
RotoKey: Place the cursor on a required key and push the joystick. Or use the
Rotokey to highlight the required key and push the RotoKey in.
(5) Note on Active Window (MCU-002, MCU-004, and MCU-005)
In the split screen mode, even if you place a cursor on a different screen, the
window will not be active. Make sure to press any key, such as joystick, on the
screen similar to how you tap the screen to activate it.
(6) Note on Power On (MCU-002, MCU-004, and MCU-005)
It is not possible to turn on the display with the MCU-002/4/5. Make sure to
press the power key of the TZT9/14/BB and TZTL12F/15F/BB. However, the
power can be turned off with the operation of [HOME & BRILL] key: Press
[HOME & BRILL] key and select [Power Off This Device] or [Power Off
Network] with the joystick or rotary knob.
9