NavNet TZtouch (Model: TZT9/14/BB) TZtouch2 (Model: TZTL12F/15F). Featuring a large rotary knob with joystick, the MCU-004 offers the expandability of hardware key operation to the multi touch operation of the TZT9/14/BB TZTL12F/15F, making best supplemental tool to multi touch operation.
This version also becomes compatible with new Radar Sensors DRS4D-NXT and DRS6A TZTL12F/15F v3.01 X-Class. 2-2 Keys and Functions – Basic Operations The MCU-004 consists of 10 hardware keys to control the TZT9/14/BB and TZTL12F/15F as described below. MCU-004 Keys Descriptions STBY / AUTO...
Page 4
: Universal setting options (1) Buzzer A buzzer is built in. When an alarm is generated on the display, the sound will come out from the MCU-004. (2) Switch Disp. The [Switch Disp.] key switches an active display when there are multiple MFDs in the network.
Page 5
MCU-002 connected to the TZTL12F/15F v3.01, the MCU-002 [ENT] key works the same as the MCU-004 [Edge] key. As introduced in Sales Bulletin FSB16-0011 Section 7-3, edge swipe functions are accessible by pressing the MCU-002 [ENT] key and moving the joystick.
Page 6
NO “drag” function. The guard zone setting of Radar, which requires to be adjusted by drag, will not be available with the MCU-004 joystick. This operation should be made by touch operations or with a generic mouse/trackball unit. (2) Limitation in 3D Mode – Pan/Tilt You can turn the screen mode into the 3D mode by selecting [3D Mode] from the contextual menu.
Page 7
(6) Note on Power On It is not possible to turn on the display with the MCU-004. Make sure to press the power key of the TZT9/14/BB and TZTL12F/15F. However, the power can be turned off with the operation of [HOME &...
3. Installing MCU-004 3-1 Dimensions 3-2 Flush Mounting The MCU-004 can be flush mounted on a console from the front side as shown in the illustration at right. (Extracted from User’s Guide) 3-3 Interconnection The MCU-004 can be used with the TZT9/14/BB and TZTL12F/15F by connection.
Page 9
TZTBB with MCU-004 TZT9/14 with MCU-004 Note: The maximum consumption current of this unit is 270 mA. To use a USB hub to connect multiple sets of MCU-004, select a USB hub considering its supply current. Example 1 A USB hub...
Page 10
June 2016 for compatibility with new Radar Sensors DRS4D-NXT and DRS6A X-Class. The MCU-004 can operate the TZT9/14/BB v4.11/4.21, but the following key components have a limitation. Items The buzzer sound from the TZT9/14/BB will NOT be generated from the MCU-004 built-in buzzer.