Mcu-004 Keys And Functions - Differences From Mcu-002 - Furuno MCU-002 Manual

2.3. MCU-004 Keys and Functions – Differences from MCU-002
The MCU-004 keys work almost the same as the MCU-002 except for the following unique keys and features.
No Uniqueness with MCU-004 – Overview
1 A buzzer is built in.
The [Switch Disp.] key switches an active display when there are
2
multiple MFDs in the network.
A big rotary knob offers a friendly operation similar to the RotoKey™
3
of TZT9/14/BB.
The [Edge] key works differently between TZT9/14/BB and
TZTL12F/15F.
TZT9/14/BB
It works the same as the [ENT] key of MCU-002
such as showing RotoKey™ menus and selecting the RotoKey™ or contextual menus.
4
TZTL12F/15F
It activates the Edge Swipe functions. Instead of swiping the screen from the top, bottom, right, or left edge,
press the [Edge] key and move the joystick in the same direction as you edge-swipe with your finger.
[Edge] + Joystick [Up]
[Edge] + Joystick [Down] : Quick Access page
[Edge] + Joystick [Right] : Data Box
[Edge] + Joystick [Left]
A buzzer is built in. When an alarm is generated on the display, the sound will be heard at the MCU-004.
The [Switch Disp.] key switches an active display when there are multiple MFDs in the network.
In the example at right, there are two (2) displays.
The MCU-004 is connected to Display No. 1. By
default, the MCU-004 controls Display No. 1. Pressing
the [Switch Disp.] key, the MCU-004 now controls
Display No. 2. Section 4 describes how to group
controllable displays in the network.
: Layer
: Universal setting options
(1) Buzzer
(2) Switch Disp.
MCU-004 vs. MCU-002
5