Mcu-005 Keys And Functions - Basic Operation - Furuno MCU-002 Manual

2.4. MCU-005 Keys and Functions – Basic Operation
The MCU-005 consists of full keys to control the TZTL12F/15F/2BB as described below.
No Key
1 Power status The LED shows the status of MCU-005 power.
2 SCROLLING Chart, Radar, and Fish Finder screens are scrolled.
3 SHIP/3D Short press: The screen goes back to the vessel position, i.e. Center Vessel, Center Radar,
Cancel History.
Long press: The chart screen goes into the 3D mode.
4 RANGE Chart, Radar, and Fish Finder ranges are adjusted.
5 RotoKey™ Chart, Radar, and Fish Finder ranges are adjusted by rotating the knob.
Menu items can be selected by rotating and pushing the knob.
6 STBY/AUTO Short press: The AUTO mode of NAVpilot-700/300 is activated.
Long press: The AUTO mode of NAVpilot-700/300 is deactivated (STBY).
7 POINTS/ROUTE Short press: A point is entered at the cursor position.
Long press: A route is created from the cursor position.
8 CURSOR The cusor can be moved.
9 Left Click Clicking the left-click key pops up a contextual menu or select a menu item.
10 Right Click The righ-click key activates the Function Gesture.
11 Edge Swipe The Edge Swipe function is activated: Press this key and press left/right/top/bottom arrows on
the CURSOR key to activate one of the Edge Swipe functions.
12 CTRL An operational screen is switched from one to another when multiple screens are connected to
the TZT2BB or multiple TZTL12F/15F and TZT2BB are networked.
13 CANCEL/MOB Short press: Current operation is cancelled.
Long press: An MOB point is entered.
14 HOME/BRILL Short press: The HOME page opens.
Long press: The Brilliance control window opens.
Descriptions
7