Standard Labor Guidelines - Delfield N8000 Service, Installation And Care Manual

N8000 Series Drop-In Installation and Operation Manual
Standard Labor Guidelines To Repair Or Replace Parts On Delfield Equipment
Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special
coverage.
• A maximum of 1-hour is allowed to diagnose a defective component.
• A maximum of 1-hour is allowed for retrieval of parts not in stock.
• A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.
• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight
damage, and/or correcting and end-user installation error will not be reimbursed under warranty unless pre-
approved with a Service Work Authorization from Delfield. You must submit the number with the service claim.
Labor Of 1-Hour Is Allowed To Replace:
• Compressor Start Components and Overload Protector
• Condenser Fan Motor and Blade
• Hi-limit/Thermal Protector Switch
• Solenoid Coil
Labor Of 2 Hours To Replace:
• Heating Element
• Solenoid Valve
Labor Of 3 Hours To Replace:
• Capillary Tubing
• Expansion Valve
Labor Of 4 Hours To Replace:
• Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor
fittings, solder, brazing rod, nitrogen, or similar fees.)
Refrigerants:
• R134A A maximum of $5.00/lb. or 31/oz. will be reimbursed.
• R404A A maximum of $15.00/lb. or $1.00/oz. will be reimbursed.
30
For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com
• Condensate Element
• Contactor/Relay
• Infinite Switch
• Thermostat
• Locate/Repair Leak
• Condenser
Delfield
™
®