Horizontal Position Commands - Star Micronics NX-1000 User Manual

HORIZONTAL POSITION COMMANDS
Set left margin
Mode ASCII
Decimal
Hexadecimal
Both < ESC > "1"
n
27 108
n
1B6C
n
Sets the left margin at column n (where n is between 0 and 255) in the
current character pitch (pica pitch if proportional spacing is selected).
The left margin does not move if the character pitch is changed later.
The left margin must be at least two columns to the left of the right margin
and within the limits below:
Pica 01nr;76
Elite
O<n191
Condensed pica 0 5 n s 130
Condensed elite 0 5 n I 152
Expanded pica Osns38
Expanded elite
Osns45
Expanded condensed pica Osns64
Expanded condensed elite Osns76
The left margin can also be set from the control panel.
Set fight margin
Mode ASCII Decimal Hexadecimal
Std. <ESC> "Q"
n
27 81 n 1B 51 n
IBM <FS>
"Q"
n
28 81
n
1C 51
n
Sets the right margin at cohtmn n in the current character pitch (pica
pitch if proportional spacing is currently selected). Column n becomes
the last character position in the line. The right margin does not move
if the character pitch is changed later. The right margin must be within
the limits below:
Pica 4sns80
Elite 5sns96
Condensed pica 7 sn I; 137
Condensed elite 8 I n I 160
Expanded pica 2sn540
Expanded elite
3<n<48
Expanded condensed pica 4sns68
Expanded condensed elite 4sns80
The right margin can also be set from the control panel.
76