Star Micronics NX-1000 User Manual page 85

Set left and right margins
Mode ASCII
Decimal Hexadecimal
I
Both 1 <ESC>
"x" nl n2 I27 88 nl n2
IlB 58 nl
n2
Sets the left margin at column nl and the right margin at column n2. See
the preceding commands for margin restrictions and other notes.
Carriage return
Mode ASCII Decimal Hexadecimal
Both i <CR>
I 13 1 OD
Prints the current line and returns the next print position to the left margin.
If DIP switch l-8 is ON, also performs a line feed.
Set automatic fine feed
Mode ASCII Decimal Hexadecimal
IBM I <ESC> '6
5
"
<I>
t 27 53
1
i 1B 35 01
Causes the printer to perform both a carriage return and line feed each
time it receives a < CR > code. This command takes priority over DIP
switch l-8.
Cancel automatic line feed
Mode ASCII Decimal Hexadecimal
IBM 1 <ESC> " 5 " co>
1 27 53 0
1 IB 35 00 I
Causes the printer to perform only a carriage return when it receives a
< CR > code. This command takes priority over DIP switch 1-8.
Backspace
Mode ASCII Decimal Hexadecimal
Both I CBS>
1 8 1 08
Moves the print position one column to the left. Ignored if the print
position is at the left margin. This command can be used to overstrike
or combine characters.
77