Bluetooth Connection; Using A Bluetooth Device As An Audio Source - REI ECVR-1500D User Manual

User's Guide
6.22

Bluetooth Connection

Verify the Bluetooth is turned on for the device and scan for either driver or passenger. If prompted for
a pass key, enter the pass key code. The default code for the radio unit is 0000. Access the" Look for
devices" feature of the mobile device and begin searching. After searching, the radio should appear in
the list of devices as DRIVER'S. Press to accept.
A prompt to bond should appear on the mobile device. Press to accept and continue the process. The
device will then ask for the pass key, enter it on the mobile device. After entering the pass key, press
OK. The mobile device should display connected. The Bluetooth® icon of the radio should appear on
the screen.
Once selected, the pairing of the device and the radio should have occurred. If successful, the Bluetooth
symbol will be visible on the Control Module in the corresponding display area. The device will indicate
it is connected to phone and media audio.
Notes:
•
•
•
6.23

Using a Bluetooth Device as an Audio Source

Verify the Bluetooth device is connected to the radio.
Use the driver's SRC button on the Control module to select Bluetooth audio.
ECVR-1500D AM/FM/WB/CD/DVD/USB/BT Motor Coach Radio User's Guide
© 2018 Radio Engineering Industries, Inc.
External DVD Player Control Layout
Only one mobile device can be paired with the radio at a time.
Once a paired mobile device is disconnected, changing the pass key will NOT disable the
device from reconnecting. Turn Driver's Bluetooth OFF in the setup to disable any unwanted
Bluetooth® devices. When set to ON, the radio is always in discovery mode.
After turning off the ignition, the radio will automatically search for the last-connected
Bluetooth® device, and if possible, restore the connection.
Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117
800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com
41