User's Guide
5
Driver's Section
5.1
Driver's VOL/SEL Selection
Rotate the knob left or right to change the volume level up or down from the Driver audio Processor.
5.2
Driver's BASS/TREBLE/BALANCE Selection
Press the knob to select one of the following functions: BASS---TREB
Rotate the knob to adjust the desired setting from -7----0 ----+7.
For Balance rotate the knob to adjust the setting from left to right.
5.3
RAD button
Press the RADIO button to pass audio from the tuned station in the Driver's section. Each press of the
RADIO button will cycle through the available options: FM1, FM2, FM3, and AM. Press and hold the
RADIO button to access the WB channels 1-7.
Press the Driver button to activate the Driver tuner as the source. The band will default to the last band
and frequency selected.
Press the Driver button again to change radio bands as follows:
FM1—FM2—FM3—AM
ECVR-1500D AM/FM/WB/CD/DVD/USB/BT Motor Coach Radio User's Guide
© 2018 Radio Engineering Industries, Inc.
Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117
800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com
22