General Information - ActronAir LR7-1W Operation Manual

Operation Manual

01. General Information

CONGRATULATIONS! The LR7 Control Interface is manufactured from the highest quality materials and designed to
ensure years of satisfactory operation.
IN THIS MANUAL, You will find instructions on how to program and utilise the many advanced features this control
interface has to offer. Please take time to familiarise yourself with all these features, apply their functions to suit your
optimum comfort requirement and achieve energy cost savings at the same time. Thoroughly read this manual in order
to ensure correct utilisation of your ActronAir air conditioner.
IMPORTANT NOTICE, ActronAir base the development of its air conditioning products on more than 30 years of
experience in HVAC, sound and continuous investments in technological innovations and product improvements,
advancement in manufacturing processes and quality control through 100% functional product testing. However,
ActronAir cannot guarantee that all the aspects of the product and the software included with the product respond to
the requirements of final application, despite the product being developed according to state of the art technology. The
customer, both end user/specifier and installer, assume all liability and risks relating to the configuration of the product in
order to reach the expected results in relation to the specific design and system installation. ActronAir, based on specific
agreements, may be consulted for the positive commissioning, installation and application of the unit, however in no
case does ActronAir accept liability for the correct operation of the final equipment / system.
Your ActronAir air conditioning unit is one of the most advanced and innovative products in the market. Its operation
is specified in the technical documentation supplied with the product or which can be downloaded from our website:
www.actronair.com.au. Your air conditioner requires set-up/configuration/programming in order to be able to operate
in the best possible way to suit your requirement. Failure to complete such operations, may result in malfunction and/or
damage to the unit, for which ActronAir accepts no liability.
Installation, commissioning and other technical services must only be carried out by a qualified technician. Ensure that
the unit installation complies with all relevant council regulations and building code standards. All electrical wiring must
be in accordance with current electrical authority regulations and all wiring connections to be as per electrical diagram
provided. Always use appropriate PPE for your safety and protection. Make sure that any safety guards and covers
are always firmly secured and not damaged. WH&S rules and regulations must be observed at all times and will take
precedence during installation process and operation of the unit.
In addition, the following instructions must be observed:
• Prevent the electrical components and electronic circuits from getting wet.
• Do not install the controlling devices in hot environments as extreme temperatures may damage the electronic
equipment.
• Do not attempt to open the controller and other electronic devices in any way other than described in this manual.
• Do not drop, shake or hit the devices, which can cause irreparable damage to its internal circuits and mechanisms.
• Do not use corrosive chemicals, solvents or other aggressive detergents to clean the unit and the control interface.
• Do not use the unit for applications other than those specified in the technical manual.
• Do not install the unit in environment with highly flammable, combustible and/or explosive articles and materials.
• This control interface must be installed in a location that complies with the temperature and humidity limits specified
in this manual.
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change
without prior notice. Please check with ActronAir Service Department on toll free number: 1800 119 229.
SPECIFICATIONS:
• Voltage: 12VDC (+10%)
• Data: Cat5e UTP (AWG 24) Data Cable.
• Storage conditions: -20 to 70
• Operating conditions: -10 to 60
o
C, < 90% RH non-condensing
o
C, < 90% RH non-condensing
Operation Manual - LR7 Wall Control
Document: 0525-075 Ver. 2 190912
LR7 Wall Controller
3