Removing The Packing Tube - Star Micronics ND-10/15 User Manual

3
the way. To replace the cover, slide the tabs in at the front
and lower it into place. Figure l-2 shows the proper position
and movement for both removing and replacing the cover.
Printer cover
Figure 1-2. Remove
the printer cover by lifting carefully.
W Removing the packing tube
The printer is shipped with a protective spiral tube to keep
the print head from being damaged during shipping. This tube
must be removed before use. First, take off the printer cover.
The protective tube is split along its bottom side to allow easy
removal. Grasp one end of the spiral tube and firmly pull it
upward and away from the carriage rail.
Figure 1-3. Remove
the protective tube from the carriage rail.