Lprint Chr$(I) - Star Micronics ND-10/15 User Manual

97
When you run this program, you will get like this:
As you can see, when the big character command is used,
the baseline for each character does not align. If you want to
align the baseline, try this program:
10
' Demo of BIG characters
20 LPRINT "THIS IS ";
30 LPRINT CHR$(27);"j";CHR$(21);
40 LPRINT CHR$(27);"h";CHR$(l);
50 LPRINT "DOUBLE" ;
60 LPRINT CKR$(27);"h";CHR$(O);
70 LPRINT CHR$(27>;"J";CHR$(18>;
80 LPRINT " SIZED PRINTING. "
90 LPRINT :LPRINT :LPRINT
100 LPRINT "THIS IS ".
110 LPRINT CHR$(27);"j";CHR$(63);
120 LPRINT CHR$(27);"h";CHR$(2);
130 LPRINT "QUAD" ;
140 LPRINT CHR$(27);"h";CHR$(O);
150 LPRINT CHR$(27);"J";CHR$(63);
160 LPRINT " SIZED PRINTING." :LPRINT :LPRINT
170 END
When you run this program, you will get this:
n The optional sheet feeder
The automatic sheet feeder is a handy option that feeds single
cut sheets automatically. Work done on cut sheets looks better