Advanced Panel Functions - Star Micronics ND-10/15 User Manual

36
key, press the MODE key once again to make your choice,
and press the ON LINE key again. Remember that you may
select which print mode is the standard one by setting DIP
switch 2- 1.
To select the Italic Panel Mode, press the TOF key while
turning on the power.
More than one attribute may be set in this way. For example,
if you wish to set both print pitch and print quality, press BOTH
the PRINT PITCH and MODE keys when turning on the
power, and after the ON LINE indicator glows, make further
selections as necessary.
ADVANCED PANEL FUNCTIONS
The printer has the capability to do some basic formatting
from the control panel, as well as move the platen by precise
amounts.
The following formatting and platen movements
may be performed from the control panel.
Key
Functions
On Line & Paper Feed Forward micro-feed
On Line & T6F
Print Pitch & TOF
Mode & TOF
Mode & Paper Feed
Reverse micro-feed
Top of form setting
Setting of left margin
Setting of right margin
**: Hold down
*: Press
Figure 3-2. You
can set many functions by the combinations of the
control panel keys in the Off
Line mode.