Installing The Mute Cover - Star Micronics ND-10/15 User Manual

5
Print
Figure 1-5.
To thread the ribbon, slide the print head carriage manually
to the right or left, and the ribbon will slip down by itself into its proper
position.
n Installing the mute cover
The mute cover reduces the printer's operating sounds.
Note the position of the guide pins on the mute cover as
shown in Figure l-6. Holding the mute cover at each end, insert
the guide pins into the cutout hooks on the printer cover.
Hold the mute cover down onto the printer.
To remove it, reverse the procedure.
Mute cover
Figure 1-6.
Install the mute cover by holding vertically, then lay down
on the printer cover.