Removing The Printer Cover - Star Micronics ND-10/15 User Manual

Star micronics printer user's manual
Table of Contents

Advertisement

2
You should also have a parallel interface board to connect
your computer
to the printer. Also available are a parallel
interface board with extra buffer memory and a serial interface
board, both optional.
(More on interfaces later.)
Figure l-l.
Check to make sure you have all five items:
1) Printer,
2) Mute
cover,
3) Paper
guide,
4) Ribbon
cartridge
and 5) User's
manual.
q Removing the printer covei
The printer's cover is important
for two reasons - it keeps
dust and dirt away from the printer's delicate mechanism,
and
it absorbs nearly all of the printer's operating
sounds. Don't
take off the cover unless you have to change the ribbon or
make an adjustment.
To remove the cover, lift up the back of the cover to disengage
the two or three tabs at the front, then lift it off the rest of

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nd-10Nd-15

Table of Contents