Table of Contents
Advertisement
Setting up
Place your printer in the position where it is going to be permanently sited,
and remove all packing material from inside the top cover. This packing
material is intended to prevent damage to the printer in transit. You may like
to keep this packing with the printer carton if you intend transporting the
printer for use at a different location.
-
.
laten knob
The platen knob should be removed from the accessory box inside the
shipping carton. Mount the platen knob on the shaft on the right-hand side
of the printer. Turn the knob on the shaft before pushing the knob fully into
position.
-
.
NOTE
Before turning the platenknob, always ensure that the power to the printer
is OFF.
3
Advertisement
Table of Contents
