Table of Contents
Advertisement
1NTERNATlONAL CHARACTER SETS
1NTERNATlONAL CHARACTER SETS
When an international character set is selected DIP switches 4 to 7 or b
When an international character set is selected DIP switches 4 to 7 or by a
1~ a
command from software, the following changes are made in the charac
command from software, the following changes are made in the character
:ter
set:
set:
See Chapter 5 for the DIP switch settings.
See Chapter 5 for the DIP switch settings.
The commands for selecting the international character sets are:
Standard mode: <ES0
"R" it IBM mode: cFS> "R" n
Where n means character code n, i.e. CIIB$(n) in BASIC. The values of n
are:
0 U.S.A.
5 Sweden
10 Denmark II
1 France
6 Italy
11 Spain II
2 Germany
7 Spain I
12 Latin America
3 England
8 Japan
13 Denmark/Norway
4 Denmark1
9 Norway
14 Irish
109
Advertisement
Table of Contents
