Table of Contents
Advertisement
graphics @Oh through DFh, F4h and F5h), but these characters can only be printed
when the standard character set has been selected.
<a@, <al> and c&2> are attribute bytes, setting the starting dot column, printable
width (in dots), and ending dot column respectively.
The vertical definition of the characters is 18 dots. Each byte therefore represents a
third of the vertical definition. If <n> bytes are required for a character, the
arrangement of these bytes is as follows (where the byte numbers are represented by
decimal numbers, starting at 0). and the total width of the character has been defined
by the parameter dx
Bit
number
1st
Byte
2nd
Byte
3rd
Byte
51
Advertisement
Table of Contents
