Star Micronics Multi-Font XR-1000 User Manual page 34

Select primary character set
<EK>
7
Both
1Bh 37h
27
55
The command above selects the primary character set,
There are no parameters. The area from 80h to 9Fh is used for control codes.
Select secondary character set
<ESC>
6
1Bh 36h
Both
1 27 54
I
The command above selects the secondary character set
There are no parameters. The area from 80h to 9Fh is used for printable characters.
Select International character set
<Esc>
R C?D
1Bh 52h Cn>
27 82
CID
<FS>
R
C?D
1Ch
52h Cn>
Standard
IBM
The command above selects an international character set, where <n> is a binary
value in the range OOh through OEh. The character set selected is dependent on the
value
of cn>, as shown in the table below:
Value of 01> International character set Value of 01> International character set
OOh
USA 08h
Japan
Olh France 09h Norway
02h Germany OAh Denmark II
03h
04h
England
1 Denmark1
OBh
Spain II
I
OCh 1 Latin America
I Sweden
1 ODh
I DenmaWNorwav
I
1 06h
I Italy
I
OEh
1 Irish
I
07h Spain I