Mighty Mule MM571W Installation Manual page 36

Step 4
TERM6
BAT+
● From the other end of the low voltage wire, BAT–
1 2 3 4 5
SW1
strip 1/2" from both the RED and BLACK
RESET
SW2
AUTO
CLOSE
wire.
● On the transformer, connect RED wire to
the screw terminal marked + and BLACK
wire to the screw terminal marked -.
LOCK AUX
● Plug the transformer into the selected
electrical outlet.
Note: Use of a surge protector is strongly
recommended.
MM572 Installation -
Transformer or Solar power wires.
20
MM571W / MM572W Installation Instructions
For dual arm installation, drill through one of the Alternate Access slots to install the
C